ace-redimix

The rainy fall season is upon us and so is the "Soft Ground"

Tue, 15 Oct 2024 12:04:29 GMT

Fall construction in Ohio

"When scheduling a concrete delivery, it's essential to consider the weight of our mixers and their placement on your jobsite. Each cubic yard of concrete weighs approximately 3800 lbs, while our mixers themselves tip the scales at around 36,000 lbs.

This means a full load will amount to 74,000 lbs or 37 tons. If you have concerns about whether your property can support this weight, we strongly recommend considering a concrete pump for precise placement.

Ensuring the safety and integrity of your site is paramount to us. If you require assistance, our knowledgeable staff can offer recommendations for local companies specializing in concrete pump services. Don't hesitate to reach out; we're here to ensure your project proceeds smoothly and safely."

Be Adaptable & Flexible

Thu, 09 May 2024 14:41:27 GMT

Flexibility is not just for yoga

There are so many variables that can affect the concrete industry making it almost impossible to have the “perfect day” on the job. Did everyone show up to work today? Has mother nature thrown a curve ball in our plans? Did a power outage shut down the Ready-Mix Plant? Did the customer before you keep the ready-mix trucks on their site to long? Did the scope of the work change overnight? Through teamwork, communication, and adaptability we can work through these challenges and succeed together. Extending grace where you can will be returned to you tenfold.

Will we fit?

Thu, 09 May 2024 14:34:50 GMT

Don't let your project turn into a "Crappy" one !

Our mixer units are approximately 12’ tall and 8’ wide and can weigh up to 74,000 lbs. When looking to schedule be sure your site will have room for us. Low overhead wires, overhead door clearance, low tree branches are all things to look out for along with tight radius turns, newly dug / backfilled underground utility trenches, septic systems and fresh backfill. These are all things that need to be taken into consideration on each jobsite. So many time we see the obvious "low" lying issues that we forget to look up. Be sure to scope out the "entire " area for safety concerns.

Technology is a powerful tool

Thu, 09 May 2024 14:19:41 GMT

Technology in place to improve our customer service

GPS tracking is a powerful tool that we have implemented to improve our delivery operations and customer satisfaction. By tracking the location of our vehicles and drivers, we gain insight into the delivery process, which help us improve efficiency, reduce costs, and provide better customer service.

Just how heavy is a loaded mixer ?

Thu, 09 May 2024 14:14:17 GMT

Just how heavy is a loaded mixer ?

Seasonal Pouring Tips

Tue, 02 Apr 2024 13:29:39 GMT

Seasonal Pouring Tips for North East Ohio

NORTHEAST SEASONAL POURING TIPS

Climate Overview :. Spring is typically cool and short, and summers are hot and humid. Fall can have warm days and cool nights. Winters are long, with heavy snowfall and ice in most areas. Most weather approaches from the west, with the occasional coastal "Noreaster" winter storm coming from the south, dropping heavy rain and snow on coastal regions. Weather plays a major role in exterior concrete placement in all seasons in this region.

Winter (December - March)

Mix Designs : Cold weather mix designs are mandatory for all exterior concrete placed during the winter. The primary considerations include chemical set accelerators to help the concrete set faster and air-entrainment admixtures to help with freeze-thaw conditions. Air entrainment should be mandatory in all exterior concrete placed in this region. Using hot water to increase concrete temperature is a common winter practice.

Placement and Curing Practices: Cold weather concrete practices are mandatory for all exterior concrete placed in this region during the winter. Due to extensive freeze-thaw conditions, this region is prone to spalling and scaling concrete. Proper mix design, placement, and curing are crucial for long-term concrete durability. The primary considerations include blankets for heat retention as well as the possibility of tenting in very cold conditions. Since the ground freezes hard, using ground heaters to thaw the ground may be necessary for winter pours. Curing concrete in these regions usually requires the use of solvent-based curing compounds or cure-and-seal chemicals to avoid freezing. With cold temperatures, time is a factor, so pumping concrete becomes more common. ACE Redimix LLC should be consulted far in advance of the concrete placement, since Ohio has road restriction weight limits that may create a logistical issue in delivering concrete. Proper planning and communication are keys to a successful winter pour.

Special Equipment:

Sprayers to apply curing compounds
Ground heaters if the ground is frozen prior to the pour
Concrete pumps to speed the placement of concrete in cold conditions
Curing blankets and non-water-based curing compounds
Tenting
Proper cold-weather attire for crews pouring and finishing the concrete

Spring

Climate (April - May) : Spring is very short in the Northeast. Temperatures are cool and conditions can be wet. The threat of snow and freezing temperatures is usually gone by mid-April, but rain is always a consideration.

Mix Designs: Because the ground will stay cold longer, chemical set accelerators are often used in concrete in the spring to help the concrete set quickly and uniformly.

Placement and Curing Practices: Windy and wet conditions can be common. Plastic sheeting, surface evaporative control agents, and curing compounds should be available on all exterior pours in the spring.

Special Equipment: Plastic sheeting; sprayers to apply curing compounds and surface evaporative control chemicals.

Summer

Climate (June - August): Hot, humid summers are the norm for much of the Northeast. Extreme temperatures are rare. Periodic rain is common, and can occur at any time of the day.

Mix Designs: Dealing with high humidity and warm weather can require the use of admixtures to extend the set time. Hydration stabilizers and water reducers are commonly used to extend the working life of the concrete without affecting performance.

Placement and Curing Practices: With high humidity and hot temperatures, quick placement is the norm for exterior concrete projects. Surface evaporative control agents should be available on all jobs, whether they are used or not. The use of curing compounds and cure-and-seal chemicals is commonplace for most exterior summer pours. Due to exposure of the hardened concrete to freeze-thaw conditions in winter, it is prone to spalling and scaling. Proper water content and finishing are critical for long-term durability.

Special Equipment: Plastic sheeting to protect concrete from sudden rain showers; sprayers to apply curing compounds and surface evaporative control chemicals.

Fall

Climate (September - November) : Fall typically experiences the most stable weather conditions of the year for pouring exterior concrete. The humidity is low, and the days are warm with cool nights. Frost and freezing temperatures can start to become a factor later in the season. Scheduling new exterior concrete work can be difficult, since concrete suppliers and installers are typically busy finishing as much work as possible before winter arrives.

Mix Designs: Hydration stabilizers and water reducers are commonly used to extend the working life of the concrete without affecting performance. Due to extensive freeze-thaw conditions air-entrainment admixtures should be used.

Placement and Curing Practices: Surface evaporative control agents should be available on all jobs, whether they are used or not. The use of curing compounds and cure-and-seal chemicals is commonplace for most exterior pours. Proper water content and concrete finishing practices are critical for long-term durability.

Special Equipment : Sprayers to apply surface evaporative control agents and curing compounds; curing blankets; plastic sheeting.

Winter Hours of Operation

Mon, 18 Mar 2024 17:45:32 GMT

Winter Hours of Operation

During the winter months, our dispatch office staff is available Monday through Friday from 7:00am to 3:30pm for your scheduling needs. Flexible delivery times can be arranged outside these times as needed; our team is willing to help make your job a success.

Failing to Prepare is Preparing to Fail, Protect Your Investment!

Mon, 11 Mar 2024 17:44:03 GMT

Failing to Prepare is Preparing to Fail, Protect Your Investment!

Special precautions must be taken in cold weather to prevent damage to concrete. The necessary degree of protection increases as the ambient temperature decreases! Use some or al of these steps to protect your investment: Mix Design adjustment, use accelerators, cover your work, heat your area if inside, etc.

Don't Let your Concrete Freeze!

josiah@crossbridgemarketing.com (Josiah Martin) — Mon, 04 Mar 2024 13:28:16 GMT

Don't Let Your Concrete Freeze!

Concrete temperatures should be maintained between 50°F until the expected strengths have been reached after the finishing process. If concrete freezes prior to reaching an initial strength of 500 psi, it will NOT achieve its intended strength.

ace-redimix

The rainy fall season is upon us and so is the "Soft Ground"

Fall construction in Ohio

Be Adaptable & Flexible

Flexibility is not just for yoga

Will we fit?

Don't let your project turn into a "Crappy" one !

Technology is a powerful tool

Technology in place to improve our customer service

Just how heavy is a loaded mixer ?

Just how heavy is a loaded mixer ?

Seasonal Pouring Tips

Seasonal Pouring Tips for North East Ohio ﻿

Winter Hours of Operation

Winter Hours of Operation

Failing to Prepare is Preparing to Fail, Protect Your Investment!

Failing to Prepare is Preparing to Fail, Protect Your Investment!

Don't Let your Concrete Freeze!

Don't Let Your Concrete Freeze!

Seasonal Pouring Tips for North East Ohio